Stainless Steel Allen Head Screws For The Ascot.

[J6G1Z]

Thanks to Bill from the FT500 Ascot Owners Group, I now know of a source for stainless steel Allen head screws for the Ascot. Check out:  http://www.z1enterprises.com

FT500 Kit: http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Bolt+Set+FT500+Ascot+82-83+&item=NGSS-299

VT500FT Kit: http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Bolt+Set+VT500+FT+Ascot+83-84+&item=NGSS-308

Shadow & Ascot Kit: http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Bolt+Set+VT500C+Shadow+VT500FT+Ascot+83-86+&item=NGSS-325

Finally I can get rid of those pesky Phillips head screws that strip out the heads so easily. Don't forget to use some Anti-Sieze on the new screws & be careful not to over-tighten them. It is easy to pull the threads out of the aluminum with the positive engagement of the Allen head & driver. Snug plus an eighth to a quarter turn is sufficient.

Good luck
J.