Author Topic: FT 500 modified (Read 91460 times)

Chronic · « **on:** February 11, 2015, 06:21:20 am »

Here´s one of my FT´s, with singlecuts and lowered frontlight and instruments. Sidecovers missing in pics.

Chronic · « **Reply #1 on:** February 11, 2015, 06:22:23 am »

Another pic..

J6G1Z · « **Reply #2 on:** February 11, 2015, 08:51:33 am »

Looks nice from the back. Where are you going to hang your license plate?

What all have you done to the bike?

Put the side covers back on & let's see the front 3/4 of the bike.

J.

Chronic · « **Reply #3 on:** February 11, 2015, 09:32:08 am »

The sidepanels are coming on soon, also a Honda 450 muffler.

The licenceplate is a bit of a problem, i dont know where to put it

There´s not so many modifications, steelbraided brakelines, new tyres and indicators.

I will post pics when its finally done..

J6G1Z · « **Reply #4 on:** February 11, 2015, 09:44:28 am »

Sounds nice. What does the Honda 450 muffler look like? Is it like a sport-bike canister? Some of those mufflers look too big on an Ascot.

I hung my plate right under the tail piece. I bent up a piece of 1" steel strap into a frame extension that supports the plate.

Have you done the jetting upgrades yet? Check out this post if you haven't seen it already: http://ascot500.com/index.php?topic=10.0

Good luck
J.

Chronic · « **Reply #5 on:** February 11, 2015, 11:22:05 am »

I bought à CRF 450 muffler, it seems to fit almost without mods, other Than cutting the connection pipe à bit ( of the muffler )

Its not that big accually.

J6G1Z · « **Reply #6 on:** February 11, 2015, 11:26:26 am »

The FT tail-pipe has a thick cork like collar on the end once you remove the original muffler. You need to scrape that off to get down to the tubing.

They run good with a freer flowing muffler & re-jetting. I also like to run a 16 tooth countershaft sprocket.

J.

thumperdh · « **Reply #7 on:** February 11, 2015, 09:49:29 pm »

Sharp looking. Could mount the license plate off of the side of the tail section (check your local laws on this though)

J6G1Z · « **Reply #8 on:** February 12, 2015, 07:40:20 am »

Here are some license plate mounts that might work, or give you an idea of how to fabricate one: http://www.dimecitycycles.com/catalogsearch/result/?q=license+plate+bracket

I used this one: http://www.cyclegear.com/SPEEDMETAL-LED-License-Plate-Frame
They are often on sale for 1/2 off.

Good luck
J.

Chronic · « **Reply #9 on:** February 12, 2015, 07:41:00 am »

Some more pics, still without sidecovers, my apologies

Chronic · « **Reply #10 on:** February 12, 2015, 07:46:07 am »

Quote from: J6G1Z on February 12, 2015, 07:40:20 am

Here are some license plate mounts that might work, or give you an idea of how to fabricate one: http://www.dimecitycycles.com/catalogsearch/result/?q=license+plate+bracket

I used this one: http://www.cyclegear.com/SPEEDMETAL-LED-License-Plate-Frame
They are often on sale for 1/2 off.

Good luck
J.

Thanks, after registration ( every two year i Sweden ) i´ll try to find a way to mount the plate on slides, so you can push it up under the tail. When riding i´ll let it hang out practically horisontal out from the tail.

At least that´s the plan so far. Other option is to Place it low behind the Wheel, svingarm mounted.

J6G1Z · « **Reply #11 on:** February 12, 2015, 07:48:08 am »

See that rubber snorkel on the air box? Most folks remove those to allow the bike to breathe a bit better. You really need to change the 2 jets in the carb. It's a fairly easy job, not expensive & really wakes up the bike. Call Mark at ThumperStuff & ask for the FT Ascot jet upgrade. You might also order a 16 tooth countershaft sprocket to allow the bike to run a bit easier & take advantage of the jetting upgrade: http://www.thumperstuff.com/FT500.html

J.

J6G1Z · « **Reply #12 on:** February 12, 2015, 07:50:13 am »

Didn't realize that you were outside the USA. I don't know what your road requirements are. Do you have to mount one of those large license plates? Can you mount the license plate frame on hinges so it swings up & contacts a magnet to hold it up while not riding, then it could swing down for riding?

J.

PS. Here's what mine looks like from the back.

Chronic · « **Reply #13 on:** February 12, 2015, 08:45:03 am »

Quote from: J6G1Z on February 12, 2015, 07:48:08 am

See that rubber snorkel on the air box? Most folks remove those to allow the bike to breathe a bit better. You really need to change the 2 jets in the carb. It's a fairly easy job, not expensive & really wakes up the bike. Call Mark at ThumperStuff & ask for the FT Ascot jet upgrade. You might also order a 16 tooth countershaft sprocket to allow the bike to run a bit easier & take advantage of the jetting upgrade: http://www.thumperstuff.com/FT500.html

J.

Previus owner have already done some modifications to the end baffel of the muffler, there´s also some inscriptions on the cylinderhead, like someone did a port tuning or something. Yes the snorkel´s gotta go i guess as well.

As soon i´m able to start using the bike, i will be testing changing jets, sprocket and so on. Right now there is icebears on the streets here in Sweden..

J6G1Z · « **Reply #14 on:** February 12, 2015, 08:58:27 am »

Are you able to make out what the inscription reads?

That may be some important info.

J.

Chronic · « **Reply #15 on:** February 13, 2015, 12:12:07 pm »

hello, an Idea just appered. i'm thinking of swirwel the rear caliper hanging down against the ground under the svingarm. It looks like à fairly easy job. Mounting a Rod between the caliper and svingarm front end.

The good things about this is you getting rid of the caliper, hiding behind the muffler, and that pretty ugly caliper brace(?) sitting on the swingarm original.

Enyone seen this beeing Done, or have any thougs about this?

wrk2ride_ride2wrk · « **Reply #16 on:** February 13, 2015, 06:13:48 pm »

Bikes looking good

good idea, you could try it out before shaving off the original brace

Chronic · « **Reply #17 on:** February 26, 2015, 05:02:03 am »

Tried out to sving down the caliper on the "spare bike" and it looked ok, but not really. Its something thats screams wrong about it, but it sure does Clean up the upper svingarm..

I´m also kinda completed the running bike..

J6G1Z · « **Reply #18 on:** February 26, 2015, 07:56:22 am »

Hey... Look at the side plates! That looks much nicer.

I think I like the caliper in the original position. It's up & out of the way if you ever venture off-road & the muffler partially hides it.

If you change your shocks to HAGON slim-line shocks, you can replace that curved caliper mount with a straight section of material like the pics below.

J.

Chronic · « **Reply #19 on:** February 28, 2015, 11:43:17 am »

Some new pics

Chronic · « **Reply #20 on:** February 28, 2015, 11:43:55 am »

One more..

Chronic · « **Reply #21 on:** February 28, 2015, 11:47:12 am »

More...

Chronic · « **Reply #22 on:** February 28, 2015, 11:48:11 am »

And again..

J6G1Z · « **Reply #23 on:** March 01, 2015, 06:25:52 am »

Looks real good! I think you are going to end up with a line of water & mud up the back of your jacket with that short rear fender.

J.

Chronic · « **Reply #24 on:** March 01, 2015, 10:03:58 am »

Right now im returning home from riding, and yes, the back is filled with mud

News:

Author Topic: FT 500 modified (Read 91460 times)