« previous next »
Pages: [1]

Author Topic: Carburetor  (Read 20907 times)

Cidde

  • Newbie
  • *
  • Posts: 3
Carburetor
« on: May 17, 2016, 04:44:27 pm »
Hi
My float messed up so I took apart and cleaned my carburetor and now it will not start. What could I have done wrong?
Logged

J6G1Z

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1597
Re: Carburetor
« Reply #1 on: May 17, 2016, 05:41:24 pm »
Hard to say without seeing what you have in front of you.

Are you sure that the float is moving up & down freely? If the float is stuck in the upward position, it will not allow any fuel into the bowl.

J.
Logged

Cidde

  • Newbie
  • *
  • Posts: 3
Re: Carburetor
« Reply #2 on: May 18, 2016, 01:41:14 am »
The cycle starts with the start gas.
Choke slide back to its original position.
I´ll get back when I've screwed it apart again.
Logged

J6G1Z

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1597
Re: Carburetor
« Reply #3 on: May 18, 2016, 11:33:24 am »
The fuel petcock is vacuum controlled. After you empty the carb, you have to crank the engine for a while to allow enough fuel to fill the bowl.

You might consider performing this modification: http://ascot500.com/index.php?topic=256.msg1070#msg1070

Make sure that you read & understand the warning that is included in that information.

J.
Logged
Pages: [1]
« previous next »