Ascot Forum

First Generation Ascots => Tech Section => Topic started by: spanner67 on December 13, 2017, 05:10:29 AM

Title: Re: FT500 Wiring Diagram
Post by: spanner67 on December 13, 2017, 05:10:29 AM
 hi ive got a kawasaki kl 250 frame with an xl 500 motor in which ive had for 4 years now and used a lot. i  have now converted it with a ft 500 top half bolted onto my xl 500 bottom half so i will have benefit of kickstart and electric start. im almost there but need help with wiring the starter in, ignition/ lights are sorted. i ve kept wiring  basic for lights /ignition. on/off for lights no indicators and a simple speedway ignition cut out. what i need is a simple drawing just showing how to wire in starter. starter solenoid/ starter control unit /starting starter solenoid relay and starter relay. nice and simple. any help would be much appreciated
[/quote]
Title: Re: FT500 Wiring Diagram
Post by: J6G1Z on December 13, 2017, 06:30:53 AM
FT 500 wiring diagram above.

J.
Title: Re: FT500 Wiring Diagram
Post by: spanner67 on December 20, 2017, 03:16:20 AM
yes thanks. i have looked at it.what i need is a simple sketch showing how to wire in starter solenoid/ starter starting solenoid/ starter control unit/ starter/ starter push button/ battery. cheers
Title: Re: FT500 Wiring Diagram
Post by: J6G1Z on December 20, 2017, 09:35:07 AM
Study the wiring diagram.

Determine what is required to meet your goal.

Remove the remaining wiring.

Done!

J.
Title: Re: FT500 Wiring Diagram
Post by: spanner67 on January 10, 2018, 11:45:53 AM
well i been messing around with wiring and ive got starter to work/engage without using starter control unit. im just using green/red wire from starter solenoid relay grounded to work everything. do i need control unit?