« previous next »
Pages: [1]

Author Topic: Ignition coil spacers  (Read 19750 times)

motomensch

  • Newbie
  • *
  • Posts: 19
Ignition coil spacers
« on: July 24, 2015, 11:14:41 am »
I need 2 of the collars/spacers that fit between the ignition coil and the frame  on an '82 FT500. OR if somebody could get me the dimensions, inner, outer diameters and length I could fabricate from something. The Honda part number is 17202 415 000.
Thanks, reply directly please.
Mel
Logged
When you stop laughing, the joke is on you!
                      coffee anyone?

scottly

  • Full Member
  • ***
  • Posts: 176
  • Humboldt, AZ USA
Re: Ignition coil spacers
« Reply #1 on: July 25, 2015, 07:10:37 pm »
Length=.862" OD=.320" ID=.245". None of the dimensions are critical; the ID has to be big enough for a 6mm bolt to pass through, and the OD could be as large as .5". The spacers could be made from 5/16" rigid fuel line.
Logged

motomensch

  • Newbie
  • *
  • Posts: 19
Re: Ignition coil spacers
« Reply #2 on: July 25, 2015, 07:42:02 pm »
thank you Scottly
Logged
When you stop laughing, the joke is on you!
                      coffee anyone?
Pages: [1]
« previous next »