Hello Ascot friends,
Recently I have notice a few drops of oil emanating from the bottom of the Water Pump. When the bike is on the kickstand this occurs, if the bike is on the center stand .. no so much. Well seeing as the bike is 34 years old I suspect the gasket (19226-MF5-000) between the water pump casing has deteriorated and needs to be replaced. However based on my investigation there is another o-ring (91302-MB0-013) as well as and oil seal (91201-MB0-000) that also may be going bad.
Just wanted to poll the forum to see what there experiences have been with this issue. It seems to me if it's just the main gasket than I should leave the others alone....but since you've gotten this far, perhaps changing them all out is not a bad idea. I would imagine though, a higher maintenance level would be needed to replace the seals & rings that are closer to the crankcase.
I'm old school, "only fix it if it needs to be fixed". Let me know -- thanks.
P.S. I also have the neutral switch shaft seal as well...JIC it needs to be replaced.