Author Topic: Parts Identification  (Read 11475 times)

goosenipper

  • Newbie
  • *
  • Posts: 6
Parts Identification
« on: November 04, 2014, 03:05:39 pm »
Hi all.  Just trying to ID the last few pieces of the boxed up Ascot VT500 I just bought.  Seems to be just about all there (at least the most important stuff).  Haven't figured out this stuff yet.  Can any one identify these parts?

J6G1Z

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1598
Re: Parts Identification
« Reply #1 on: November 04, 2014, 03:20:17 pm »
The rubber piece at the top middle is for the rear fuel tank mount.

I think that the 2 parts directly under the rubber tank mount, are grab handles that go towards the rear of the bike, under the tail-piece.

Not sure what the rest is.

Good luck
J.

Luke

  • Jr. Member
  • **
  • Posts: 80
Re: Parts Identification
« Reply #2 on: November 05, 2014, 01:38:25 am »
I agree with J ... :)

The plastic thing with the two holes goes on the front forks below the junction box ... it's easier to show you ;)

Pic is looking up from front tire.. lowest bolt in pic is upper rad bolt.

The bracket at the bottom of your pic is for the brake line ... and it lives as shown in the second pic ... inside, left fork

I think the remainder are just bonus parts ... lol

Thanks .. that was a great test of my tear down journal and pics!  ;D
« Last Edit: November 05, 2014, 01:50:35 am by Luke »
1984 VT500FT - WIP

goosenipper

  • Newbie
  • *
  • Posts: 6
Re: Parts Identification
« Reply #3 on: November 05, 2014, 12:24:15 pm »
Thanks for the info guys.  That is so helpful.  These are the last pieces of the puzzle (so far).  Anyone know where they go?


Luke

  • Jr. Member
  • **
  • Posts: 80
Re: Parts Identification
« Reply #4 on: November 05, 2014, 01:30:33 pm »
Yup .. on a different bike ;)


1984 VT500FT - WIP

J6G1Z

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1598
Re: Parts Identification
« Reply #5 on: November 05, 2014, 02:04:22 pm »
Those parts don't look familiar, but I have never completely dismantled a complete VT Ascot.

They do appear to be the type of part, or style of fabrication, that would indicate a motorcycle part, possibly even Honda. I would hang on to them. You might find out where they go & you could tell us.

Good luck
J.

2fast2young

  • Newbie
  • *
  • Posts: 15
Re: Parts Identification
« Reply #6 on: December 12, 2014, 04:39:56 pm »
Looks like the peg holders?

goosenipper

  • Newbie
  • *
  • Posts: 6
Re: Parts Identification
« Reply #7 on: April 15, 2015, 11:10:41 am »
Those last unidentified parts are the brackets mounted to the seat to fasten the seat to the frame!  Just saw them in the parts catalogue.