Author Topic: Getting rid of some parts from this FT500. Tracker build leftovers.  (Read 5278 times)

aitkinascot

  • Newbie
  • *
  • Posts: 14
So here's the bike:



And here's what's gotta go to a new home:

- headlamp and wiring
- speedo/tach
- tank
- tail fairing
- undertake
- rear lamp
- swingarm
- fork
- wheels
- stock brakes
- stock shocks
- seat
- battery box
- sidecovers (would need a little rigging. Some tabs are broken. Shocker, I know.)
- any small parts attached to the above

Basically, I need the main harness, the frame and the motor. Anything else can go. Let me know what you need. I'll make a heck of a deal on stuff to get rid of it.

aitkinascot

  • Newbie
  • *
  • Posts: 14
No one needs any of this stuff? I mean, I don't mind throwing parts in the dump, but I figured someone must need something. Lol

I'm gonna strip this beast this week. If someone needs something now is a good time to mention it. I've sworn off of being a part hoarder so I don't shelve crap anymore. :)

scottly

  • Full Member
  • ***
  • Posts: 161
  • Humboldt, AZ USA
I am interested in the brake stuff! I could also use the fuel petcock. Where are you located?

aitkinascot

  • Newbie
  • *
  • Posts: 14
I'm in Aitkin, MN. Small central MN town.

You want front or rear or both? What all do you need?

scottly

  • Full Member
  • ***
  • Posts: 161
  • Humboldt, AZ USA
I need the rear master and reservoir, but if the price is right, I'll take as much as will fit into a large USPS flat rate box, if it's just going to the dump anyway. ;)

aitkinascot

  • Newbie
  • *
  • Posts: 14
Reservoir is missing the cap.

Make an offer on it and the master and they're yours.

Just cause I said I was gonna run stuff to the dump doesn't mean I'm gonna give it away for free...;)

Tytan

  • Newbie
  • *
  • Posts: 1
Are you selling the choke cable ?


upperb

  • Newbie
  • *
  • Posts: 13
Am interested in the forks, tank and exhaust, if available.  If so, please PM condition and prices.  Thank you.

aitkinascot

  • Newbie
  • *
  • Posts: 14
Are you selling the choke cable ?

I can. Let me know what you'd offer for it.

I usually work on gsxr oil boilers for streetfighters and vintage harley/brit choppers, so the prices for parts on this bike are foreign. I can look on ebay. But that's not always the most reasonable price.

mintimiki

  • Newbie
  • *
  • Posts: 6
Hello,

Interested in front/rear turn signal assembly wires relay flasher etc...


PM me if your willing to sell!

aitkinascot

  • Newbie
  • *
  • Posts: 14
Re: Getting rid of some parts from this FT500. Tracker build leftovers.
« Reply #10 on: June 14, 2015, 04:43:55 PM »
Hello,

Interested in front/rear turn signal assembly wires relay flasher etc...


PM me if your willing to sell!

The assemblies are pretty poor shape.

RustRunner

  • Newbie
  • *
  • Posts: 12
Re: Getting rid of some parts from this FT500. Tracker build leftovers.
« Reply #11 on: June 22, 2015, 10:05:42 PM »
Would you sell the starter and or the ignition switch assembly (need keys too)

aitkinascot

  • Newbie
  • *
  • Posts: 14
Re: Getting rid of some parts from this FT500. Tracker build leftovers.
« Reply #12 on: June 23, 2015, 11:57:29 AM »
STARTER AND IGNITION SWITCH/IGNITION ANCILLARIES SOLD. THANKS RUSTRUNNER

montanaredneck77

  • Newbie
  • *
  • Posts: 9
Re: Getting rid of some parts from this FT500. Tracker build leftovers.
« Reply #13 on: June 30, 2015, 11:28:20 PM »
do you still have any parts from this Bike? If so how much for the speedo and tack? Also how much for the seat?

aitkinascot

  • Newbie
  • *
  • Posts: 14
Re: Getting rid of some parts from this FT500. Tracker build leftovers.
« Reply #14 on: July 19, 2015, 07:20:11 AM »
do you still have any parts from this Bike? If so how much for the speedo and tack? Also how much for the seat?

I don't know if my messages are making it to you or not, but let me know if you still need these.

montanaredneck77

  • Newbie
  • *
  • Posts: 9
Re: Getting rid of some parts from this FT500. Tracker build leftovers.
« Reply #15 on: July 19, 2015, 11:29:56 PM »
If the Tach is in good condition or still has the needle I could defiantly use it as well as the speedometer. It all depends on how much you want for them. Not sure about the seat yet, I could probably fix mine but if you still have it how much for yours? Any chance you are selling the stator and flywheel? Also how much for the wheels if you still have them?

Thanks in advance,

Sean

aitkinascot

  • Newbie
  • *
  • Posts: 14
Re: Getting rid of some parts from this FT500. Tracker build leftovers.
« Reply #16 on: July 20, 2015, 04:24:50 AM »
If the Tach is in good condition or still has the needle I could defiantly use it as well as the speedometer. It all depends on how much you want for them. Not sure about the seat yet, I could probably fix mine but if you still have it how much for yours? Any chance you are selling the stator and flywheel? Also how much for the wheels if you still have them?

Thanks in advance,

Sean

Speedo/Tach unit-$55.00

Both Needles still there.

Seat with tail-$85.00

The tear in the seat is a super easy fix, it's along one of those "heat stitch look" seams.

Stator and Flywheel-$90.00

Wheels- $25.00 each

Those prices are based on recently closed and sold auctions on Ebay.






motomensch

  • Newbie
  • *
  • Posts: 16
Re: Getting rid of some parts from this FT500. Tracker build leftovers.
« Reply #17 on: July 24, 2015, 08:00:41 AM »
I need 2 of the collars/spacers that fit between the ignition coil and the frame  on an '82 FT500. OR if somebody could get me the dimensions, inner, outer diameters and length I could fabricate from something. The Honda part number is 17202 415 000.
thanks,
Motomensch
When you stop laughing, the joke is on you!
                      coffee anyone?