Author Topic: jay  (Read 7986 times)

jay

  • Newbie
  • *
  • Posts: 5
jay
« on: December 01, 2016, 12:26:53 pm »
Hi, first time to post for me, my question is I have a 84 VT500FT I am doing a mild resto mod on, The clutch activated switch, what purpose does it serve and can it be eliminated. I want to put a new clutch handle and perch on the bike.

All comments welcome! (I have also brought back to life an '81 XS650 and '82 Virago to nice café machines)

Thanks!

Dynachuck

  • Newbie
  • *
  • Posts: 17
Re: jay
« Reply #1 on: December 03, 2016, 12:27:53 am »
It keeps the starter from working until you pull the clutch in. A safety feature so if you hit the starter button while in gear, the bike won't take off and fall over. Yes they can be eliminated. I eliminated mine on my WR450 so I could run arc levers. I don't remember if I shorted the two wires together or just unhooked them. Just be consistent about pulling the clutch in when starting the bike.

jay

  • Newbie
  • *
  • Posts: 5
Re: jay
« Reply #2 on: December 05, 2016, 06:36:12 am »
Ok, many thanks, I was figuring that might be the reason it was there, but I prefer to find out more before I start making changes to the electrical system. My virago "had" the same feature.
Thanks again Dynachuck!

Jay