Author Topic: Fuel door seal  (Read 11720 times)

hacker-pschorr

  • Newbie
  • *
  • Posts: 11
Fuel door seal
« on: May 14, 2018, 10:39:28 pm »
I'm restoring a VT500, getting the gas tank cleaned & sealed up I cannot lock the fuel door.  The rubber (or whatever) in the fuel door is rock hard so you cannot press it down enough to lock.

Is the only option a new fuel door for $70 or can the internals be replaced with a giant o-ring or something?

smcohio

  • Newbie
  • *
  • Posts: 20
Re: Fuel door seal
« Reply #1 on: May 15, 2018, 05:23:37 am »
In all the parts drawing I am seeing no list the seal as a changeable part. Looks like you will have to buy the whole fuel door assembly or get crafty with trying to make one for it.

hacker-pschorr

  • Newbie
  • *
  • Posts: 11
Re: Fuel door seal
« Reply #2 on: May 15, 2018, 09:31:26 am »
I was seeing the same thing on the part drawing.  Whatever that seal is made from is rock hard on my tank.

This was a barn find, got it running 10 years ago when I found it.  5 years later the tank started leaking, parked it and moved onto other projects.  Finally got the tank wended up, sealant is curing.

Bucko

  • Full Member
  • ***
  • Posts: 106
Re: Fuel door seal
« Reply #3 on: May 16, 2018, 02:14:20 am »
New caps on eBay for as little as ~ $11.  From Hong Kong - have no idea if they're any good or why they'd be making these unless they fit some bike we don't know about.  Anyway, it might be worth getting one just to cannibalize the rubber seal.

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.H0.XVt500+Ascot+Fuel+Cap.TRS0&_nkw=Vt500+Ascot+Fuel+Cap&_sacat=0

hacker-pschorr

  • Newbie
  • *
  • Posts: 11
Re: Fuel door seal
« Reply #4 on: May 16, 2018, 02:29:16 pm »
Dear Lord....how did I not check eBay first???

Ordered the $22 out of Texas, figured that would be here faster.  I'll report back once it arrives.

Bucko

  • Full Member
  • ***
  • Posts: 106
Re: Fuel door seal
« Reply #5 on: May 19, 2018, 02:44:58 am »
Good stuff.  Please post a review once you have it.

hacker-pschorr

  • Newbie
  • *
  • Posts: 11
Re: Fuel door seal
« Reply #6 on: June 23, 2018, 01:40:11 pm »
You can see the differences in the photos, not sure the significance....  The new one was covered in a light blue protective vinyl that was a PIA to get off, but not a big deal.

It fits, seems to seal fine, very satisfied with the results.


hacker-pschorr

  • Newbie
  • *
  • Posts: 11
Re: Fuel door seal
« Reply #7 on: June 23, 2018, 01:41:39 pm »
----

Bucko

  • Full Member
  • ***
  • Posts: 106
Re: Fuel door seal
« Reply #8 on: June 23, 2018, 10:17:33 pm »
Thanks for posting.  Good to know.

Some of the ones I've seen for sale say they're made out of Stainless Steel.  Is the one you have chromed or SS?